英文合同15篇[優秀]
隨著法律觀念的日漸普及，合同的用途越來越廣泛，合同協調著人與人，人與事之間的關系。相信很多朋友都對擬合同感到非常苦惱吧，以下是小編收集整理的英文合同，歡迎閱讀與收藏。
![英文合同15篇[優秀]](https://p.9136.com/00/l/bacfcdac03.jpg)
英文合同1
Commercial Contract
商業合同
No：
合同號：
Date：
日 期：
The Buyer： Zhonghua International Technology Corporation
賣方：菲爾德·埃米森公司
The Seller： Field Emission Corp.
買方：中華國際技術開發公司
This contract is made by and between the Buyer and the Seller， whereby the Buyer agrees to buy and the Seller agrees to sell the under-mentioned commodity according to the terms and conditions stated below：
根據本合同條款，買方同意購買，賣方同意出售下述貨品，茲簽訂本合同。
1. Commodity： camera-control equipment
1、品名：攝像機控制設備
Quantity： 60 （sets）
數量：60（臺）
Unit price： USD4 800.00
單價：4 800美元/臺
Total amount： USD288 000.00
總額：288 000美元
2. Country of origin and manufacturer： Field Emission Corp. in US
2、原產國別及生產商：美國菲爾德·埃米森公司
3. Packing
3、包裝
To be packed in strong wooden cases or cartons， suitable for long distance ocean， parcel post or air freight transportation as well as changing climate and with good resistance to moisture and shocks.
用堅固的木箱或紙箱包裝，適宜長途海運、郵寄或空運及適應氣候變化，并且具備良好的防潮抗震能力。
The Seller shall be liable for any damage of the commodity due to improper packing and for any rust attributable to inadequate protective measures in regard to the packing.
由于包裝不當而引起的貨物損壞或由于防護措施不善而引起貨物銹蝕，賣方應賠償由此而造成的全部損失費用。
One full set of service and operation manual shall be enclosed in each case.
包裝箱內應附有完整的維修保養、操作使用說明書。
4. Shipping mark：
4、運輸標志
The Seller shall mark on each package with fadeless paint the package number， gross weight， net weight， measurement and warnings such as “HANDLE WITH CARE”， “KEEP AWAY FROM HEAT”， “KEEP AWAY FROM MOISTURE” as well as shipping mark.
賣方應在每個貨箱上用不褪色油漆標明箱號、毛重、凈重、長、寬、高，并標有“小心輕放”，“防潮”及“防熱”等字樣和運輸標志。
5. Date of shipment： Aug. 8， 20xx
5、裝運日期：20xx年8月8日
6. Port of shipment： Los Angeles
6、裝運港：洛杉磯
7. Port of destination： Ningbo
7、目的港：寧波
8. Insurance：
8、保險
To be borne by the Buyer after shipment.
裝運后由買方投保。
9. Payment， under conditions （1）， （2） and （3） below：
9、支付條件 分以下三種條件支付：
（1） Through the letter of credit：
（1）信用證
The Buyer， on receipt from the Seller of the delivery advice， shall open an irrevocable letter of credit with the Bank of China， in favor of the Seller for the total value of shipment 25 – 30 days prior to the date of delivery. The credit shall be available against Seller‘s draft drawn at sight on the opening bank for 100% invoice value accompanied by the shipping documents specified in Clause 10 hereof. Payment shall be effected by the opening bank by telegraphic transfer against presentation of the aforesaid draft and documents. The letter of credit shall be valid until the 20th day after the shipment is effected.
買方收到賣方交貨通知，應在交貨日期前25 – 30 天，由中國銀行開出以賣方為受益人的與裝運金額相同的不可撤銷的信用證。賣方須向開證行出具100％發票金額即期匯票并附本合同第10款所規定的裝運單據。開證行收到上述匯票和裝運單據即予以電匯支付。信用證于裝運日期后20天內有效。
（2） Collection：
（2）托收
The Seller may present the sight draft together with the shipping documents （specified in Clause 10 hereof） through the Seller‘s bank and Buyer’s Bank to the Buyer for collection after shipment.
貨物裝運后， 賣方出具即期匯票，連同本合同第10款規定的.裝運單據，通過賣方所在地銀行和買方銀行提交給買方托收。
（3） By direct remittance：
（3）直接付款
Payment shall be effected by the Buyer， by telegraphic transfer， within 7 （seven） days after receipt from the Seller of the shipping documents specified in the Clause 10 hereof.
買方收到本合同第10款規定的裝運單據后7天內， 以電匯向賣方支付貨款。
10. Documents：
10、單據
（1） In case of sea-freight：
（1）海運
Full set of clean bills of lading marked “Freight to Collect”， “Freight Prepaid” made out to bank endorsed notifying Zhonghua International Technology Development Corporation at the port of destination.
全套清潔海運提單，標明“運費付訖”，“運費預付”，做成空白背書并注明通知目的港的中華國際技術開發公司。
（2） In case of air-freight：
（2） 空運
One copy of airway bill marked “Freight to Collect”， Freight Prepaid“ and sent to the Buyer.
空運提單副本一份，標明“運費付訖”，“運費預付”，寄交買方。
（3） Invoice in 4 copies indicating contract number and shipping mark， made out in details as per the contract concerned.
（3）發票一式4份，標明合同號和裝運標志，發票根據有關合同詳細填寫。
（4） Packing list in 2 copies issued by the manufacturer.
（4）由生產商出具的裝箱單一式兩份。
（5） Certificate of quality and quantity issued by the manufacturer.
（5）由生產商出具的質量和數量保證書。
（6） The Buyer shall be advised by mail/cable immediately after shipment.
（6）貨物裝運后立即用電報或信件通知買方。
In addition， the Seller shall， within 10 （ten） days after shipment， send by airmail two sets of aforesaid documents （except item 4） with one set directly to the Buyer and one set directly to Zhonghua International Technology Development Corporation at the port of destination.
此外，發貨10天內，賣方將上述單據（第5條除外）航寄兩份，一份直接給買方，一份直接給目的港的中華國際開發公司。
11. Shipment
11、裝運
（1） In case of FOB terms
（1） 離岸價格條款（FOB條款）
a. The Seller shall， 30days before the contracted date of shipment， advise the Buyer by cable or letter of the contract number， name of commodity， quality， value， package number， gross weight， measurement and date of readiness at the port of shipment for the Buyer to book shipping space.
1）賣方于合同規定的裝運日期前30天，用電匯或信件將合同號、品名、數量、價值、箱號、毛重、裝箱尺寸和貨物抵裝運港日期通知買方，以便買方租船訂艙。
b. Booking of shipping space shall be arranged by the Buyer‘s shipping agent， China Ocean Shipping Agency.
2）買方船運代理中國外輪代理公司，負責辦理租船訂艙事宜。
c. The Buyer‘s shipping agent （China Ocean Shipping Agency） shall send to the Seller notice indicating the name of vessel， estimated date of loading and contract number for the Seller to arrange shipment 10 （ten） days before the estimated date of arrival of the vessel at the loading port. The Seller is requested to get in close contract with the shipping agent. When it becomes necessary to change the carrying vessel or to advance or delay the arrival date， the Buyer or the shipping agent shall advise the Seller in time. Should the vessel fail to arrive at the loading port within 30 （thirty） days after the arrival date advised by the Buyer， the Buyer shall bear the storage and insurance expenses incurred from the 30 day thereafter.
3）買方船運代理（中國外輪代理公司）預計船抵達裝運港10天之前，將船名、預計裝貨日期、合同號等通知賣方，以便賣方安排裝運。要求賣方與船運代理保持密切聯系。當需要更換承運船只及船只提前、推遲抵達時，買方或其船運代理應及時通知賣方。如船在買方通知日后30天內未能到達，則第30天后倉儲費和保險費用由買方承擔。
d. The Seller shall be liable for any dead freight or demurrage， should it happen that they have failed to have the commodity ready for loading after the carrying vessel has arrived at the port of shipment on time.
4）如承運船如期抵達裝運港，賣方因備貨未妥而影響裝船，則空艙費和滯期費均由賣方承擔。
e. The Seller shall bear all expenses and risks before the commodity passes over the vessel‘s rail and is released from the tackle. After it has passed over the vessel’s rail and is released from the tackle， all expenses and risks shall be in Buyer‘s account. 5）貨物超過船舷并從吊鉤卸下前，一切費用和風險由賣方承擔；貨物超過船舷并從吊鉤卸下，一切費用和風險由買方承擔。
（2） In case of CFR terms
（2）成本加運費價條款（CFR條款）
a. The Seller shall ship the goods within the shipment time from the loading port to the port of destination. Transshipment is not allowed.
1） 在裝運期內，賣方負責將貨物從裝運港裝運至目的港。不得轉船。
b. In case the goods are to be dispatched by air freight， the Seller shall， 30 （thirty） days before the time of delivery as stipulated in Clause 5， inform the Buyer by cable or letter of the estimated date of delivery， contract number， name of commodity， and invoiced value. The Seller shall， immediately after dispatch of the goods， advise the Buyer by cable or letter of the contract number， name of commodity， invoiced value and date of dispatch for the Buyer to arrange the insurance in time.
2） 貨物空運時，賣方于本合同第5條規定的交貨日期前30天，以電報或信件把預計交貨期合同號、品名、發票金額等通知買方。發貨后，賣方立即以電報或信件將合同號、品名、發票金額、發貨日期通知買方，以便買方及時投保。
12. Shipping advice
12、裝運通知
The Seller shall， immediately on the completion of the loading of the goods， advise the Buyer by cable or letter of the contract number， name of commodity， quantity， invoiced value， gross weight， name of vessel and date of sailing. In case the Buyer fails to arrange insurance in time due to the Seller‘s not having cabled in time， all losses shall be borne by the Seller.
貨物一俟全部裝船，賣方應即將合同號、呂名、數量、發票金額、毛重、船名及啟航日期用電報或信件通知買方。如因賣方未能及時通知致使買方不能及時投保，賣方則承擔全部損失。
13. Guarantee of quality
13、質量保證
The Seller guarantees that the commodity hereof is made of the best materials with first class workmanship， brand new， unused， and complies with the quality and specifications stipulated in this contract. The guarantee period shall be 12 （twelve） months staring from the date on which the commodity arrives at the port of destination.
賣方保證：所供貨物由最好的材料及精湛工藝制成，商標為新的和未經使用的，其質量和規格符合本合同所做的說明。自貨物到達目的港起12個月為質量保證期。
14. Claims
14、索賠
Except those claims for which the insurance company or the owners of the vessel are liable， should the quality， specifications or quantity be found not in conformity with the stipulations of the contract， within 90 （ninety） days after the arrival of the goods at destination， the Buyer can use the Inspection Certificate issued by China National Import and Export Commodities Inspection Corporation to claim for replacement as compensation. All the expenses incurred （such as inspection charges， freight charges for returning and sending of replacement， insurance premium， storage， loading and unloading charges） shall be borne by the Seller.
自貨物到達目的港起90天內，如發現貨物質量、規格、數量與合同規定不符，除那些應由保險公司或由船方承擔的部分外，買方可憑中國進出口商品檢驗總公司出具的商檢證書，有權要求更換或索賠。
In regard to quality， the Seller shall guarantee that if， within 12 （twelve） from the date of arrival of the goods at destination， damages occur in the course of operation by reason of inferior quality of material or bad workmanship， the Buyer shall immediately notify the Seller in writing and put forward a certificate issued by the CCIC. The certificate so issued shall be accepted as the base of the claim. The Seller， in accordance with the Buyer‘s claim， shall be responsible for the immediate elimination of the defects， complete or partial replacement of the commodity， or devaluate the commodity according to the state of defects. Where necessary， the Buyer may eliminate the defects themselves at the Seller’s expenses. If the Seller fails to reply within on month after receipt of the aforesaid claim， the claim shall be reckoned as having been accepted by the Seller.
賣方保證，貨物到達目的港12個 月內，如果使用過程中由于材料質量低劣和工藝不佳而出現的損壞，買方立即以書面形式通知賣方并出具中國進出口商品檢驗總公司開列的檢驗證書，提出索賠。商 檢證書為索賠的依據。按買方索賠要求，賣方有責任立即排除貨物的缺陷、全部或部分更換或根據缺陷情況將貨物作降價處理。
15. Force Majeure
15、不可抗力
The Seller shall not be held responsible for delay in shipment or non-delivery of the goods due to Force Majeure， which might occur during the process of manufacturing or in the course of loading. The Seller shall advise the Buyer of the occurrence mentioned above within 15 （fifteen） days and send by airmail a certificate of the incident issued by the local government to the Buyer. Even in such cases， the Seller is still liable to take all possible measures to expedite the delivery of goods.
在貨物制造和裝運過程中，由于發生不可抗力事故致使延期交貨或不能交貨，賣方概不負責。賣方在不可抗力事件發生后，應立即通知買方并在事發14天內，將事故發生所在地當局簽發的證書航空郵寄給買方以作證據。即使在此情況下，賣方仍有責任采取必要的措施，盡快交貨。
Should the Seller fails to perform the contracted obligations 10 （ten） weeks after the aforesaid incident， the Buyer shall have the right to treat the contract as null and void.
不可抗力事故發生后超過10個星期而合同尚未履行完畢，買方有權撤銷合同。
16. Late delivery and penalty
16、合同延期和罰款
Should the Seller fail to make delivery within the contracted period for reasons other than Force Majeure specified in Clause 15 hereof， the Buyer may accept the postponement on condition that the Seller agrees to pay a penalty which shall be deducted by the paying bank from the agreed amount of payment. The penalty， however， shall not exceed 5% （five percent） of the total value of the goods involved in the late delivery. The rate of penalty is charged at 0.55（zero point five percent） for every seven days， odd days less than seven days should be counted as seven days. In case the Seller fails to make delivery ten weeks later than the shipment stipulated in the contract， the Buyer shall have the right to cancel the contract. The Seller， in spite of the cancellation， shall still pay the aforesaid penalty to the Buyer without delay.
除本合同第15條所述不可抗力原因外，賣方如不能按合同規定如期交貨，并同意支付罰金，買方可同意延期交貨，付款銀行相應減少議定的支付金額，但罰款不得超過遲交貨物總額的5％。賣方如逾期10個星期仍不能交貨，買方有權撤銷本合同。盡管合同已撤銷，但賣方仍應如期支付上述罰金。
17. Arbitration
17、仲裁
All deputes in connection with this contract or the execution thereof shall be settled through friendly consultations. Should no settlement be reached， the case may then be submitted for arbitration to the Foreign Economic and Trade Arbitration Commission of the CCPIT in accordance with the rules and procedures of the said Arbitration Commission. The arbitration shall take place in 15 （fifteen） days. The decision of the Arbitration Commission shall be final and binding on both Parties. The arbitration fee shall be borne by the losing Party. The arbitration may also be settled in a third country mutually agreed upon by both Parties.
凡與本合同有關或因執行本合同而發生的一切糾紛，應通過友好協商解決，如果協商不能解決，則可提交中國國際貿易促進委員會對外經濟貿易仲裁委員會并根據該會仲裁法則和程序進行仲裁。仲裁將在15天內進行，仲裁裁決為最終裁決，對雙方都有約束力。仲裁費用由敗訴方承擔。仲裁也可在雙方都能接受的第三國進行。
18. Special provisions
18、附加條款
In witness thereof， this contract is signed by both Parties in two original copies； each Party shall keep one copy.
本合同一式兩份，雙方簽字劃押，各執一份，特此證明。
The Buyer： Zhonghua International Technology Corporation
買方：中華國際技術開發公司
The Seller： Field Emission Corp.
賣方：菲爾德·埃米森公司
英文合同2
INTERNATIONAL SALESCONTRACT
The Seller agrees to sell and the buyer agrees to buy the undermentioned commodity according to the terms and conditions stated below:
(1)Product description:
(a) model number:BCD—226STV
(b)About the exterior appreance:
total volume(L):226
power comsumption(kW.h/24h):0.6
effective area of freezer:58
effective area of variable greenhouse:43
effective area of storage room:125
dimentions(L*W*H):580*560*1786mm
(c)About the function:
Fresh kept; automatic thermostat;
over-temperature alarm; led display;
individual shutdown.
Unit Price: $680 (680 dollars)per set
Quantity:1000 sets
(2)Contract Value：$680,000(six hundred and eighty dollars )
(3)Country of Origin: China
(4)Port of Shipment: Dalian,China
(5)Port of Destination: Newyork,Ameirica
(6)Time of Shipment: November 12th, 20xx
(7)Packing: The goods must be properly packaged, suitable for ocean-going and long-distance land transport, moisture, shock, anti-rust resistance, rough handling, to ensure that the goods will not be damaged by the above reasons, so good to arrive safely. Any loss caused by poor packing should be born by the seller.
(8)Marks: The seller must use non-fading paint to print each box number, size, gross weight, net weight, hanging position, "this side up", "Handle with care", "keep dry" and other words.
(9) Insurance：The insurance shall be covered by the Seller under the term of CIF for 110% of the invoice value against all risks.
(10) Terms of Payment: Letter of Credit.
The buyer shall 30 days prior to shipment open an irrevocable credit contained the buyer as the payer and the seller as the beneficiary through U.S. bank. China bank should commit the credit after he received and verificated the following documents.
(a)Full set of clean on board ocean Bills of Lading made out to Great World Store and blank endorsed marked freight to collect； (b)Commercial lnvoice；
(c) The Inspection Certificate of Quality issued by CCIC of China； (d)Certificate of Origin；
(e)Notice of Shipment.
(11)Terms of Shipment:
(a)The seller must notify the buyer name of the booking vessel and itstransportation routes 40 days before sail, for the buyer to confirm. (b)The seller must notify the buyer expected time of delivery, contract number, invoice amount, the number and the shipment weight and size of each piece 20 days before shipment.
(C) The seller must notify the buyer of goods, quantity, gross weight, invoice amount, name of the vessel, and departure dates by telegraph/telex within 48 hours after shipment.
(d) If any piece of cargo to meet or exceed the weight of 10 tons, 15meters long , 10 meters wide, the seller shall 50 days before shipment provide the buyer with five copies of detailed packing drawing, indicating detailed size and weight, so that the buyer can arrange inland transport.
(e)Transhipment and Partial shipment are both not allowed.
(12) Inspection:
(a)The seller must test the quality of goods, specification and quantity fully and accurately, and issue a quality certificate to prove that the delivery is in accordance with the relevant provisions of the contract , but this certificate is not the fianl basis toprove quality of the goods, specifications, performance, and number .The seller should attach the written report contained inspection details and results of tests to the quality manual.
(b)After the goods arrive at the port of destination, the buyer must apply to the U.S. Commodity Inspection Bureau for inspecting the quality of goods, specification and quantity , and issue a certificate of inspection. If you find that the quality, specification and quantity
do not match with the contract, in addition to which insurance companies or ship shall be responsible for, the buyer has the right to refuse accepting the goods and claim to the seller,within 7 days after arrival at the port of destination .
(c) If the inspection certificate can not be settled within the validity period of the contract for some unforeseen reasons, the buyer should telephone the seller to extend the inspection period for 3 days.
(13)Claims:
(a) Within 3 days from the date of the arrival of the goods at the final destination,if the quality,specification,quantity and packing of the goods are found not in conformity with the stipulations of this contract,the Buyer shall give a notice of claims to the Seller within the above mentioned time limit and have the right to lodge claims . (b)Considering the result from the defect of the goods ,the Buyer has the right to bring the claims for their damages against the Seller. The Seller shall undertake to make the compensation for claims,except those for which the insurrance company should undertake the obligations.
(14)Force Majeuer:
(a)If any contracting party could not fulfill the contract by resistance
英文合同3
Employer:___________
Legal Representative:___________
Address:___________
Employee:___________
Name:___________
Gender:male
Address:___________
Nationality:P.R.China___________ID Card No.:___________
This Contract is signed on a mutuality voluntary basis by and between the following Employer and Employee in accordance with the Labour Law of People’s Republic of China."
1.Term of the Contract:
The term of this contract is for one year and shall commence on_____,_____, and shall continue until _____,_____,unless earlier terminated pursuant to this Contract. The Employee shall undergo a probationary period of three months.
2.Job Description:
The Employer agrees to employ Mr./Ms.________(name)as ________(job title) in ________Department, located in________(office location and city).
3. Remuneration of Labour
a.The salary of the Employee shall bemonthly paid by the Employer in accordance with applicable laws and regulations of P.R.C. It shall be paid by legal tender and not less than the standard minimum salary in Tianjin.
b. The salary of the Employee is RMB$______ per month in the probationary period and RMB$ _____ after the probationary period.
c. If the delay or default of salary takes place,the Employer shall pay the economic compensation except the salary itself in accordance with the relevant laws and regulations.
4.Working Hours & Rest & Vocation
a.The normal working hours of the Employee shall be eight hours each day, excluding meals and rest for an average of five days per week, for an average of forty hours per week.
b.The Employee is entitled to all legal holidays and other paid leaves of absence in accordance with the laws and regulations of the PRC and the company ’s work rules.
c. The Employer may extend working hours due to the requirements of its production or business after consultation with the trade union and the Employee ,but the extended working hour for a day shall generally not exceed one hour; If such extension is called for due to special reasons, the
extended hours shall not exceed three hours a day.However, the total extension in a month shall not exceed thirty-six hours.
5.Social Security & Welfare
a.The Employer will pay for all mandatory social security programs such pension insurance, unemployment insurance, medical insurance of the Employee according to the relevant government and city regulations.
b.During the period of the Contract, the Employee’s welfare shall be implemented accordance with the laws?and relevant regulations of P.R.C.
6.Working Protection & Working Conditions
a.The Employer should provide the Employee with occupational safety and health conditions conforming to the provisions of the State and necessary articles of labor protection to guarantee the safety and health during the working process.
b.The Employer should provide the Employee with safety education and technique training; The Employee to be engaged in specialized operations should receive specialized training and acquire qualifications for such special operations.
c. The Employee should strictly abide by the rules of safe operation in the process of their work.
7.Labour Discipline
a.The Employer may draft bylaws and labour disciplines of the Company, According to which, the
Employer shall have the right to give rewards or take disciplinary actions to the Employee;
b.The Employee shall comply with the management directions of the Employer and obey the bylaws and labour disciplines of the Employer.
c.The Employee shall undertake the obligation to keep and not to disclose the trade secret for the
Employer during the period of this Contract; This obligation of confidentiality shall survive the
termination of this Contract for a period of two (2)years.
8.Termination, Modification, Renew and Discharge of the Contract
a. The relevant clauses of the Contract may be modified by the parties:
i.The specific clause is required to be modified by the parties through
consultation;
ii.Due to the force majeure, the Contract can not be executed;
iii.The relevant laws and regulations have been modified or abolished by the time of signing the
Contract.
b.The Contract may be automatically terminated:
i) This Contract is not renewed at the expiration of this Contract;
ii) The Employer is legally announced to be bankruptcy, dismissed, or canceled;
iii)The death of the Employee occurs;
iv) The force majeure takes place;
v)The conditions of termination agreed in the Contract by the parties arise.
c.The Contract may be renewed at the expiration through consultation by the parties with the fulfillment of the procedure within 15 days to the expiration;
d. The Contract may be discharged through consultation by the parties;
e.The Contract may be discharged by the Employer with immediate effect and the Employee will not be compensated:
i.The Employee does not meet the job requirements during the probationaryperiod;
ii.The Employee seriously violates disciplines or bylaws of the Employer;
iii.The Employee seriously neglects his duty, engages in malpractice for selfish ends and brings
significant loss to the Employer;
iv.The Employee is being punished by physical labour for its misfeasance
v.The Employee is being charged with criminal offences:
f.The Contract may be terminated by the Employer by giving notice in written form 30(thirty) days in advance:
i.The Employee fails ill or is injured to (other than due to work) and after completion of medical
treatment, is not able to perform his previous function or any other function the Employer assigns to him;
ii.The Employee does not show satisfactory performance and after training and adjusting measures is still not able to perform satisfactorily;
iii.The circumstances have materially changed from the date this Contract was signed to the extent that it is impossible to execute the Contract provided, however,that the parties cannot reach an agreement to amend the contract to reflect the changed circumstances.
iv.The Employer is being consolidated in the legal consolidation period on the brink of bankruptcy or the situation of business is seriously in trouble, under such condition, it is required to reduce the
emplouee.(in legal procedure)
g.The Employee shall not be dismissed :
i. The Contract has neither expired nor conformed to 8.d,8.e,8.f,8.g;
ii.The Employee is ill with occupational disease or injured due to work and has been authenticated fully or partly disabled by the Labour Authentication Commission in Baodi County, Tianjin.
iii. The Employee is ill or injured (other than due to work) and is within the period of medical leave provided for by applicable PRC law and regulations and Company policy;
iv.The Employee is woman who is pregnant, on maternity leave, or nursing a baby under one year of age; or
iii.The applicable PRC laws and regulations otherwise prohibit the termination of this Contract.
h.The Contract may be dicharged by the Employee by giving notice in written form 30(thirty) days in advance. However, the Employee may inform the Employer to discharge the Contract at random under the following occasions:
i.The Employee is still in the probationary period;
ii.The Employer force the Employee to work by violence, duress or illegal restriction to physical
freedom;
iii. The Employer does not pay the remuneration of the Employee accordance with the relevant clause in the Contract;
iv.The Employer violates the relevant regulations of State or Tianjin for its terrible safe and health
condition, which is harmful to the Employee’s health.
I.The Contract can not be terminated by the Employee before the expiration if not conforming to 8.d, 8.h,
j. The Employer shall pay the economic compensation to the Employer if the Contract is terminated conforming to 8.d,8.f,8.h.i-8.h.iv. Additional fee for medical allowance should be paid to the Employee if the Contract is terminated conforming to 8.f.i.
9.Breach Liabilities
a. Due to either party’s fault, if breaching the Contract, that party shall undertake the breach
liability according to the extent to the performance of the Contract; if the parties both breach the Contract,they shall undertake its separate liability according to the concrete situation.
b. Due to either party’s fault, if breaching the Contract to damage the other party. The damage should be compensated by the faulty party accordance with the relevant laws and regulations of PRC.
c.Due to the force majeure, causing the non-performance or the damages to either party, the other party may not undertake the breach liability;
c.The Employee wants to resign and has received training provided by the Employer, the Employee shall compensate for the training cost. The method of compensation should be fixed according to the relevant company regulations as follows:
The Employee shall compensate RMB_______ within___year(s) in the Company if the Contract is terminated by the Employee at his cause;
The Employee shall compensate RMB_______ within___year(s) in the Company if the Contract is terminated by the Employee at his cause;
The Employee shall compensate RMB_______ within___year(s) in the Company if the Contract is terminated by the Employee at his cause;
10.Labor Disputes
Where a labor dispute between the parties takes place during the performance of this Contract, the
parties concerned may seek for a settlement through consultation; or either party may apply to the labor dispute mediation committee of their unit for mediation; if the mediation fails and one of the parties requests for arbitration, that party may apply to the labor dispute arbitration committee for arbitration. Either party may also directly apply to the labor dispute arbitration committee for arbitration within 60 days starting from the date of the occurrence of a labor dispute. If one of the parties is not satisfied with the adjudication of arbitration, the party may bring the case to a people’s court within 15 days of the date of receiving the ruling of arbitration
11.The verification of this Contract shall be made in Baodi Labour Bureau, Tianjin within 30 days after being signed by the parties.
Employer: (official stamp)___________Employee:___________
Representative :___________
Address___________Address:___________
Date: July ,20xx
It’s verified herein that the Contract conforms to the relevant laws and regulations through examination and review.
Authority;
Clerk:___________
英文合同4
外貿經紀人傭金合同
Commission Agreement of Foreign Trade Agents
甲方：（生產廠家）______________________________
乙方：（中間人）_______________________________
Party A: (manufacturer)______________________________
Party B: (intermediary )_______________________________
根據《中華人民共和國合同法》和有關法律法規的規定，乙方接受甲方的委托，為甲方產品開拓海外市場，雙方經協商一致，簽訂本合同。
According to "People's Republic of China Contract Law" and the provisions of relevant laws and regulations, Party A hereby appoints Party B to develop overseas market. Both Parties have agreed to sign this agreement.
第一條：委托事項
1. THE ENTRUSTED MATTERS
甲方委托乙方發展海外市場為甲方營銷其產品。
Party A hereby appoints Party B to develop overseas market and promote its products.
第二條：委托事項的具體要求
2. OBLIGATION
（1） 甲方應保證所生產產品的合法性及保證產品質量。
Party A shall ensure the legality of the products and ensure product quality.
（2） 甲方與海外客商交易的具體價格、交貨方式、支付方式等由甲方與海外客商雙方協商約定。
All the trade terms including price, payment term, delivery, etc are negotiated by Party A and customers.
（3）甲方應嚴格按國家的'“FOB、 C&F或 CIF條款”執行與海外客商所簽定的合同。
Party A shall be in strict accordance with the " FOB, C & F or CIF terms in the contracts.
（4）乙方承諾每年給甲方介紹______美元的銷售額。
Party B promise that the turnover will be more than USD ______ per year through Party B.
（5）乙方應協助甲方回收全額貨款及提供最新的市場信息。
Party B should assist Party A to receive the full payment as per the sales contracts.
Party B will provide the market information to Party A.
（6）乙方不能將甲方營業范圍內的海外客戶關系泄露給第三方，否則甲方會按盜竊公司機密對乙方提起公訴。
Party B should not disclose the customer information to a third party. Otherwise Party A will indict Party B.
第三條：傭金的計算、給付方式、給付時間
3. Rate of commission, payment term
（1） 甲方同意按每筆合同成交總額（扣除稅金，運費和貨代的費用）的______支付傭金給乙方。
Party A will agree to pay ______ of the total turnover of each contract - deducting taxes and the freight- to Party B.
（2） 給付方式及時間：
Payment term
在甲方收到合同金額全款后14天內一次性付給乙方。
Party A will pay 100% commission within 14 days upon receiving the full payment from customer.
第四條：違約責任
4. Liability
甲方若不按本合同第三條的（2）執行，逾期一天應支付乙方滯納金，滯納金系數為：總傭金的5‰/天。
If Party A does not follow (2) of Section 3, Party A have to pay the overdue fine. The amount is 5 ‰ of the total commission per day.
第五條：協議仲裁
5. AGREEMENT ARBITRATION
雙方如果發生糾紛，可憑此合同向甲方所在仲裁機構進行。In the event of dispute, both parties can present to arbitration court from Party A’s place.
第六條：本合同未盡事宜雙方協商解決。
6. CHANGES.
Any changes of terms relating to this agreement must be done in a written form, and agreed upon by both parties.
現行協議條款的修改必須經協議雙方授權人書面簽字方能生效。
第七條：特別約定。
SPECIAL CLAUSE
本合同一式肆份雙方各執貳份具有同等法律效用。中英文版本如有沖突，以中文版本為準。 This agreement has been drawn up in four identical copies, of which two copies for each party. The Chinese version of these Terms and Conditions shall prevail wherever there is a discrepancy between the English and Chinese versions. 第八條：履行
IMPLEMENTATION
本合同雙方簽字蓋章即為有效。
Whilst signature on this agreement certifies the intention of both parties to the agreement, the terms of this agreement shall become binding upon both parties only at such time as the following have been complied with, in writing.
第九條：同意簽字人AGREEMENT SIGNATORIES
下面簽約的各方接受本合同中的所有條款.
In witness thereof, the parties have signed below and by doing so have accepted and approved all covenants, terms and conditions of this agreement.
---------------------------- -----------------------
簽名蓋章
簽訂日期
Signing date: 簽名蓋章
英文合同5
房屋租賃合同
PREMISES LEASE CONTRACT
本合同雙方當事人
Parties hereto
出租方（甲方）：
Lessor（hereinafter referred to as Party A）:
承租方（乙方）：
Lessee（hereinafter referred to as Party B）:
根據國家有關法律、法規和本市有關規定，甲、乙雙方在平等自愿的基礎上，經友好協商一致，就甲方將其合法擁有的房屋出租給乙方使用，乙方承租使用甲方房屋事宜，訂立本合同。 Party A and B have, in respect of leasing the legitimate premises owned by Party A to Party B,reached an agreement through friendly consultation to conclude the following contract underthe relevant national laws and regulations, as well as the relevantstipulations of the city.
一、建物地址
1. Location of the premises
甲方將其所有的位于___ 市___ 區___ 的房屋及其附屬設施在良好狀態下出租給乙方___ 使用。
Party A will lease to Party B the premises and attached facilities owned by itself which is locatedat (Location) and in good condition for.
二、房屋面積
2. Size of the premises
出租房屋的登記面積為 平方米（建筑面積）。
The registered size of the leased premises is square meters (Gross size).
三、租賃期限
3. Lease term
租賃期限自___ 年 ___ 月 ___ 日起至___ 年___ 月___ 日止，租期為期___ 年， 甲方應于___ 年___ 月___ 日將房屋騰空并交付乙方使用。
The lease term will be from___ （month）___ （day）___（year）to ___ （month）___ （day）___ （year）, Lease Term year(s).
Party A will clear the premises and provide it to Party B for use before___ （month）___ （day）___ （year）.
四、租金
4. Rental
1. 數額：雙方商定租金為每月___ 元整（含管理費）。乙方以現金形式支付給甲方。
1）Amount：
the rental will be ___ RMB per month (including management fees). Party B will paythe rental to Party A in the form of cash.
2. 租金按 月為壹期支付；第一期租金于___ 年___ 月 ___ 日以前付清；以后每期租金于每月的 日以前繳納，先付后住（若乙方以匯款形式支付租金，則以匯出日為支付日，匯費由匯出方承擔）；甲方收到租金后予書面簽收。
2）
Payment of rental will be one installment every month(s). The first installment will be paidbefore ___ （month）___ （day） ___
（year）. Each successive installment will be paid by(date) of each month. Party B will pay the rental before using the premises and attachedfacilities （In case Party B pays the rental in the form of remittance, the date of remitting will bethe day of payment and the remittance fee will be borne by the remitter.） Party A will issue awritten receipt after receiving the payment.
3. 如乙方逾期支付租金超過七天，則每天以月租金的.0.3％支付滯納金；如乙方逾期支付租金超過十天，則視為乙方自動退租，構成違約，甲方有權收回房屋，并追究乙方違約責任。 3）
Where the rental is more than 7 working days overdue, Party B will pay 0.3 percent ofmonthly rental as overdue fine every day, if the rental be paid 10 days overdue, Party B will bedeemed to have withdrawn from the premises and breach the contract. In this situation,Party A has the right to take back the premises and take actions against party B‘s breach.
五、押金
5. Deposit
1. 為確保房屋及其附屬設施之安全與完好，及租賃期內相關費用之如期結算，乙方同意于___ 年___ 月 ___ 日前支付給甲方押金___ 元整，甲方在收到押金后予以書面簽收。 1）
Guarantying the safety and good conditions of the premises and attached facilities andaccount of relevant fees are settled on schedule during the lease term, party B shall pay toparty A as a deposit before ___ （month） （day） ___ （year）. Party A shall issue a writteeceipt after receiving the deposit.
2. 除合同另有約定外，甲方應于租賃關系消除且乙方遷空、點清并付清所有應付費用后的當天將押金全額無息退還乙方。
2) Unless otherwise provided for by this contract, Party A will return full amount of the depositwithout interest on the day when this contract expires and party B clears the premises and haspaid all due rental and other expenses.
3. 因乙方違反本合同的規定而產生的違約金、損壞賠償金和其它相關費用，甲方可在押金中抵扣，不足部分乙方必須在接到甲方付款通知后十日內補足。
3）
In case party B breaches this contract, party A has right to deduct the default fine,compensation for damage or any other expenses from the deposit. In case the deposit is notsufficient to cover such items, Party B should pay the insufficiency within ten days afterreceiving the written notice of payment from Party A.
4. 因甲方原因導致乙方無法在租賃期內正常租用該物業，甲方應立即全額無息退還押金予乙方，且乙方有權追究甲方的違約責任。
4）
If Party B can’t normally use the apartment because of Party A, Party A should return thedeposit to Party B at once. And Party B has the right to ask for the compensation from PartyA.
六、甲方義務
6. Obligations of Party A
1. 甲方須按時將房屋及附屬設施（詳見附件）交付乙方使用。
1）
Party A will provide the premises and attached facilities （see the appendix of furniture listfor detail） on schedule to Party B for using.
2. 房屋設施如因質量原因、自然損耗、不可抗力或意外事件而受到損壞，甲方有修繕并承擔相關費用的責任。如甲方未在兩周內修復該損壞物，以致乙方無法正常使用房屋設施，乙方有權終止該合約，并要求退還押金。
2）
In case the premise and attached facilities are damaged by quality problems, naturaldamages or accidents, Party A will be responsible to repair and pay the relevant expenses. IfParty A can‘t repair the damaged facilities in two weeks so that Party B can’t use the facilitiesnormally, Party B has the right to terminate the contract and Party A must return the deposit.
3. 甲方應確保出租的房屋享有出租的權利，如租賃期內該房屋發生所有權全部或部分轉移、設定他項物權或其他影響乙方權益的事件，甲方應保證所有權人、他項權利人或其他影響乙
方權益的第三者能繼續遵守本合同所有條款，反之如乙方權益因此遭受損害，甲方應負賠償責任。
3）
Party A will guarantee the lease right of the premise. In case of occurrence of ownershiptransfer in whole or in part and other accidents affecting the right of lease by party B. party Ashall guarantee that the new owner, and other associated, third parties shall be bound by theterms of this contract. Otherwise, Party A will be responsible to compensate party B‘s losses.
4. 甲方應為本合同辦理登記備案手續，如因未辦理相關登記手續致該合同無效或損害乙方租賃權利，應由甲方負責賠償，且甲方應承擔該合同相關的所有稅費。
4）
Party A must register this contract with the relevant government authority If not doingso resulting that this contract is invalid or Party B‘s right of leasing may be damaged, Party Ashould take the all responsibilities. Party A should also bear the all the relevant taxes
七、乙方義務
7. Obligations of Party B
1. 乙方應按合同的規定按時支付租金及押金。
1）Party B will pay the rental and the deposit on time.
2. 乙方經甲方同意，可在房屋內添置設備。租賃期滿后，乙方將添置的設備搬走，并保證不影響房屋的完好及正常使用。
2）
Party B may add new facilities with Party A‘s approval. When this contract expires, Party Bmay take away the added facilities without changing the good conditions of the premises fornormal use.
3. 未經甲方同意，乙方不得將承租的房屋轉租或分租，并愛護使用該房屋如因乙方過失或過錯致使房屋及設施受損，乙方應承擔賠償責任。
3）
Party B will not transfer the lease of the premises or sublet it without Party A‘s approvaland should take good care of the premises. Otherwise, Party B will be responsible tocompensate any damages of the premises and attached facilities caused by its fault andnegligence.
4. 乙方應按本合同規定合法使用該房屋，不得擅自改變使用性質。乙方不得在該房屋內存放危險物品。否則，如該房屋及附屬設施因此受損，乙方應承擔全部責任。
4）
Party B will use the premises lawfully according to this contract without changing the natureof the premises and storing hazardous materials in it. Otherwise, Party B will be responsible forthe damages caused by it.
5. 乙方應承擔租賃期內的水、電、煤氣、電話費、收視費、一切因實際使用而產生的費用，并按單如期繳納。
5）
Party B will bear the cost of utilities such as telephone communications, water, electricity andgas on time during the lease term.
八、合同終止及解除的規定
8. Termination and dissolution of the contract
1. 乙方在租賃期滿后如需續租，應提前一個月通知甲方，由雙方另行協商續租事宜。在同等條件下乙方享有優先續租權。
1）
Within one month before the contract expires, Party B will notify Party A if it intends toextend the lease. In this situation, two parties will discuss matters over the extension. Underthe same terms Party B has the priority to lease the premises.
2. 租賃期滿后，乙方應在 日內將房屋交還甲方；任何滯留物，如未取得甲方諒解，均視為放棄，任憑甲方處置，乙方決無異議。
2）
When the lease term expires, Party B will return the premises and attached facilities to PartyA within days. Any belongings left in it without Party A's previous understanding will bedeemed to be abandoned by Party B. In this situation, Party A has the right to dispose of itand Party B will raise no objection.
3. 本合同一經雙方簽字后立即生效；未經雙方同意，不得任意終止，如有未盡事宜，甲、乙雙方可另行協商。
3）
This contract will be effective after being signed by both parties. Any party has no right toterminate this contract without another party’s agreement. Anything not covered in thiscontract will be discussed separately by both parties.
九、違約及處理
9. Breach of the contract
英文合同6
Contract of Loan
甲方： 合同編號：
Party A： Contract No：
乙方：濰坊傳盛商用設備有限公司
Party B： China Manufacturing Solutions(China) Ltd
甲乙雙方經過詳細磋商，達成以下協議：
Party A and Party have reached an agreement to conclude the following contract：
一、 甲方同意無息借款給乙方，作為購買生產設備用。
1. Party A agrees to supply a Interest-free loan to party B
for purchasing production facility.
二、 借款金額：USD25 萬元，(美金貳拾伍萬美元整)
2. Loan Amounts： USD 250，000(two hundred and fifty thousand US Dollar)
三、 借款期限：從20xx年12月01日起至20xx年12月01日止，共2年。
3. Life of loan： from 1st December 20xx until 1st December 20xx，totally 2 years
四、 償還方式：從20xx年12月02日起分3次還清，可以提前還款。
4. Repayment term： 3 installments to pay off from 2nd December 20xx， can be paid upfront.
五、 匯款方式：甲方在20xx年12月3日前將USD12萬元分**次匯入乙
方在中國農業銀行濰城支行開立的外債專用賬戶。
Remittance route： Party A will remit XXXX in XXXX paymentsto the special account of ABC bank WeiCheng branch for external debtof Party A.
六、 提款方式：乙方根據生產經營需要，憑單據或用款計劃向外匯管理局申請提款。
6. Withdraw term： According to the production and business operation demand， Party B applies to Foreign Exchange Control Bureau for withdraw money by related documents or Expensesplan.
七、 違約責任：如乙方無法按時還清借款，甲方有權按乙方開戶行的年平均利率收取違約滯納金，直到還清為止。
7. Liability for breach of contract： On default of repayment by due date of Party B， Party A is entitled to charge for a late fee based on the annual average interest rate of Party Bs opening bank.
八、 合同一式兩份，雙方各執一份，經國家外匯管理局濰坊中心支局批準后生效，至還清借款時失效。
8. 2 copies of the contract， one for each party， become effective when it is approved by Foreign Exchange Control Bureau WeiFang branch， become invalid after paying off all loans.
九、 同未盡事宜雙方協商解決，如協商無效，按中國有關法律法規處理。
10. This contract negotiations to resolve outstanding issues， shall be dealt with according to the relevant Chinese laws if the negotiation invalid.
甲方： 乙方：
Party A Party B
代表： 代表：
representative representative
電話： 電話：
Tel ： Tel：
日期： 日期：
Date Date
英文合同7
離婚協議書
Divorce Agreement
男方姓名 Name of Man：
出生年月Date of birth ：
民族Nation ：身份證號ID：住址
女方姓名Name of Woman：
出生年月Date of Birth：
民族Nation：漢Han身份證號ID：住址
雙方于$$$$年$$$$$月$$$$日在吉林省人民政府辦理結婚登記手續。
We both in August 29th of 20xx obtained the legal marriage registration in the People's Government of Jilin Province.
現因雙方性格不合無法共同生活，夫妻感情已完全破裂，就自愿離婚一事達成如下協議：
Now because both sides have cultural and character differences, caused the sensation of husband and wife complete burst and could not live together anymore, now both sides decide to have entered into the following agreement of divorce:
一、雙方自愿解除夫妻關系。
Both sides decide to dissolve the marriagevoluntarily.
二、財產分割
Division of Property
(1)雙方認可婚后分開居住期間各自收入歸各自所有的約定;
The both sides agreed that they can have their own incomeof their respective.
(2)雙方確認無其它共同債權、無共同債務。
The two sides have confirmed they don’t have any other common creditor's rights of debts.
三、離婚后，一方不得干擾另一方的生活，不得向第三方泄漏另一方的個人隱私，不得有故意損壞另一方名譽的行為。
After divorce agreement come into effect, one side can’t disturb another’s life, can’t betray each other’s personal privacy to anyone. Can’t made quite a dent in each other’sreputation.
四、雙方確認對方是完全民事行為能力的人，能夠自行處分自己的`行為和財產。
Both the man and the women shall have completely civil capacity; they can dispose their property by themselves.
五、本協議經雙方簽字后，待有效的法律文書生效時具有法律效力。雙方承諾對該協議書的字詞義非常清楚，并愿意完全履行本協議書，不存在受到脅迫、欺詐、誤解情形。
After both sides sign the agreement, it will have legal effect when the effective legal documents have taken effect.
六、本協議書一式三份，甲乙雙方各執一份，婚姻登記部門保留一份。在雙方簽字，并經婚姻登記機關辦理相應手續后生效。
This agreement is in triplicate, both side shall hold one copy, the marriage registration department keep one copy.
Man男方：Woman女方：
年月日年月日
YM D Y M D
英文合同8
技 術 合 作 協 議
Technical Cooperation Agreement
甲方：XX油脂化學有限公司
Party A: XX Grease Chemical Co. , Ltd.
地址： XX高新技術工業園
Address:XXHigh-tech Industrial Park
法定代表人：XXX
Legal Representative: XXX
乙方：
Party B:
地址：
Address:
本協議合作雙方就組建技術研發團隊事項，經過平等協商，在真實、充分地表達各自意愿互惠互利的基礎上，根據《中華人民共和國合同法》的規定，達成如下協議，并由合作各方共同恪守。
This Agreement, concerning the setting up of a technical research and development team, is made according to the Contract Law of PRC regulations and entered into through equal negotiation by both Parties as the free and full expression of their own wishes to mutual benefits, and to this end both Parties shall abide by this Agreement as following.
第一條、 甲方同意雇用乙方為新產品研發技術顧問。乙方同意為甲方提供技術
顧問服務。
Article 1: Party A hereby agrees to employ party B as the technical consultant for the new product research and development. Party B hereby agrees to offer technical consultation service to Part A.
第二條、 甲方同意每月支付乙方的研究費用，包括：薪資、辦公費、檢測費、
差旅費以及其他相關費用。
Article 2: Party A hereby agrees to pay Party B for the research each month, including salaries, administrative expenses, detection cost, traveling expenses and other cost associated.
第三條、 乙方有責任為甲方提供相關國內外技術及市場信息，并及時答復甲方
技術上所遇到的問題。
Article 3：Party B is responsible to provide relevant technical and market information home and abroad and is ready to answer any technical problem frequently asked by Party A.
第四條、 乙方有義務向甲方提供有關個人簡歷和相關證明材料，甲方要尊重乙
方個人隱私，有義務妥善保管相關材料。
Article 4: Party B shall has the obligation to provide Party A with any relevant personal resume and reference documents as necessary. Party A shall respect the personal privacy of Party B and has the obligation to properly keep those materials.
第五條、 乙方同意所研發的.產品所有知識產權歸甲方所有，乙方不得將相關技
術信息泄露給任何第三方，否則需要承擔一切法律后果。
Article 5: Party B hereby agrees that the intellectual property of any product as researched and developed herein shall be owned by Party A. Party B shall not be allowed to disclose any technical information concerned to the third party, or it shall take all the legal consequences.
第六條、 甲乙雙方同意通過緊密合作達到共同目標；每年增加一到三個項目；
每年申請一到三個發明專利；每年完成一到兩個能夠通過專家認證的
新產品；每年至少向市場推廣兩個產品。
Article 6: Both Parties agree to achieve their common goals by their close cooperation. It is planned to add one to three projects each year and to apply for one to three patents for inventions each year, to make one to two new products certified by experts each year, and to promote at least two products to the market each year.
第七條、 此協議甲乙雙方各執一份，沒有在協議中提到的事項雙方需協商解決。 Article 7: This Agreement is held by both Parties, one for each respectively. Any issue not mentioned in this Agreement shall be settled by both Parties through negotiation.
此協議從簽字當日起生效。
This Agreement shall take effect from the date of signature.
甲方：乙方：
Party AParty B:
簽字：簽字：
Signature: Signature:
日期：日期：
DateDate:
英文合同9
甲方(用人單位)：
代理人：
Party A (Employer):
Authorized Agent：
乙方(實習生)：
Alex居民身份證號碼：
ID Number:
為明確實習學生與實習單位的責任與義務，經甲、乙雙方協商，在自愿、平等、公平的基礎上，一致同意簽訂本協議。
The contract is hereby concluded by both parties to definite each other’s responsibilities, in the principles of fairness, legitimacy, equality, voluntariness, consensus through negotiation and good faith.
一、協議期限Contract Term
本協議自20___年___月__日起至20___年__月____日止。
二、實習崗位Job Responsibilities
甲方根據乙方的實際情況和工作需要，安排實習學生在英文編輯崗位實習，乙方應按公司的工作要求，努力完成實習任務。 in accordance with both parties’ need and
arrangement. Party B shall fulfill his job according to company’s business requirement.
三、實習補貼Labor Remuneration
依照按勞取酬的原則，按甲方現行制度確定實習生的實習補貼。具體支付方法如下：實習補貼___美元/小時，其他獎勵:根據實習生在崗工作表現而定。
Party A shall pay off salary to Party B in accordance with current salary system and regulation:
四、工作時間及休息假日Working Hours and Resting Hours
1、每周工作10小時;
1. Party B shall work for 10 hours a week.
2、每小時英文文章修改量不低于1000字;
2. Party B shall review English essays with more than 1000 words per hour.
五、合同解除、變更、終止Revocation and Termination of Labour Contracts
1、經甲乙雙方協商同意，本協議可以變更或解除;
1. The contract could be revoked upon agreement between the parties hereto.
2、乙方在本合同履行期間可以在說明原因的情況下向甲方提出終止實習合同，但必須提前1個月通知甲方，并作好工作交接，否則應承擔相關責任。
2. Party B cannot suspend the contract during the period of validity unless he informs Party A andexplains the reason 1 month in advance and arranges the handing-over, or Party B shall take theresponsibility of any loss of Party A.
3、實習期間，乙方無法達到實習崗位工作要求甚至對甲方項目等造成損失或的.，甲方有權單方面終止實習生勞動合同，并保留追究法律責任的權益。
3. Party A has the right to suspend the contract if Party B can not meet the demand of the job,even causes loss for Party A. Party A reserves the rights to investigate for legal responsibility
六、法律效力Miscellaneous
本合同正本一式兩份，雙方各執一份，經甲乙雙方簽字后生效。
The contract is in duplicate, held by Party A and Party B respectively. The contract comes into effect upon signatures or seals of both parties.
甲方(簽章)：______
乙方(簽字)：______
Party A (Signature and seal):
Party B (Signature):
日期：___年___月___日
日期：___年___月___日
Date:
Date:
英文合同10
(ORIGINAL)
中國上海中山東一路27號 合 同 號 碼
27 Chuangshan Road (E.1.) Shanghai, ChinaContract No.
買方：合 同 日 期：
The Buyers：CONTRACT Date：
傳真：
FAX：021—291730
. 電 傳 號：
Telex number：TEXTILE
茲經買賣雙方同意，由買方購進，賣方出售下列貨物，并按下列條款簽訂本合同：
This CONTRACT is made by and between the Buyers and the Sellers；whereby the Buyers agree to buy and the
Sellers agree to sell the undermentioned goods on the terms and conditions stated below：
（1）貨物名稱、規格、包裝及嘜頭 （2）數量 3）單價 （4）總值 （5）裝運期限
Name of Commodity, Specifications, QuantityUnit Price Total Amount Time of Shippment
（6） 裝 運 口 岸：
Port of Loading：
（7） 目 的 口 岸：
Port of Destination ：
（8） 付 款 條 件：買方在收到賣方關于預計裝船日期及準備裝船的數量的通知后，應于裝運前20天，
通過上海中國銀行開立以賣方為受益人的不可撤銷的信用證。該信用證憑即期匯票及本合同第（9）條規定
的單據在開證行付款。
Terms of Payment：Upon receipt from the Sellers of the advice as to the time and quantify expected ready
for shipment, the Buyers shall open, 20days before shipment, with the Bank of China ,Shanghai, an irrevocable
Letter of Credit in favour of the Sellers payable by the opening bank against sight draft accompanied by the
documents as stipulated in Clause (9) of this Contract.
（9）單 據：各項單據均須使用與本合同相一致的文字，以便買方審核查對：
Documents：To facilitate the Buyers to cheek up, all documents should be made in a version identical to that
used in this contract.
填寫通知目的口岸對外貿易運輸公司的空白抬頭、空白背書的全套已裝船的清潔提單。（如本合同為
FOB價格條件時，提單應注明“運費到付”或“運費按租船合同辦理”字樣；如本合同為CFR價格條件時，
提單應注明“運費已付”字樣。）
Complete set of Clean On Board Shipped Bill of Lading made out to order, blank endorsed, notifying the
China National Foreign Trade Transportation Corporation ZHONGWAIYUN at the port of destination. (if the
prise in this Contract is Based on FOB, marked “freight to collect” or “freight as per charter party”; if the price in
this Contract is Based on CFR, marked “freight prepaid”.)
B.發 票：注明合同號、嘜頭、載貨船名及信用證號，如果分批裝運，須注明分批號。
Invoice：indicating contract number, shipping marks, name of carrying vessel, number of the Letter of Credit
and shipment number in case of partial shipments.
C. 裝箱單及或重量單：注明合同號及嘜頭，并逐件列明毛重、凈重。
Packing List and/or Weight Memo：indicating contract number, shipping marks, gross and net weights of
each package.
D. 制造工廠的品質及數量、重量證明書。
Certificates of Quality and Quantity/Weight of the contracted goods issued by the manfactures.
品質證明書內應列入根據合同規定的標準進行化學成分、機械性能及其他各種試驗結果。
Quality Certificate to show actual results of tests to be made, on chemical compositions, mechanical
properties and all other tests called for by the Standard stipulated heron.
E. 按本合同第（11）條規定的裝運通知電報抄本。
Copy of telegram advising shipment according to Clause (11) of this Contract.
F. 按本合同第（10）條規定的航行證明書。（如本合同為CFR價格條件時，需要此項證明書，如本合同
為FOB價格條件時，則不需此項證明書。）
Vessels itinerary certificate as per Clause (10) of this Contract, (required if the price in this Contract is based on CFR：not required if the price in this Contract is based on FOB.)
份數 Number of 單證
copiesDocuments
寄送 AB C D E FTo be distributob
送交議付銀行（正本）3 4 3 311
to the negotiating bank (original)
送交議付銀行（副本） 1
to the negotiating bank (duplicate)
空郵目的口岸外運公司（副本）2 3 2 2
to ZHONGWAIYUN at the port of destination by airmail (duplicate)
（10）裝運條件
Terms of Shipment ：
A． 離岸價條款 Terms of FOB Delivery：
a) 裝運本合同貨物的船只，由買方或買方運輸代理人中國租船公司租訂艙位。賣方負擔貨物的一切費用風
險到貨物裝到船面為止。
For the goods ordered in this Contract, the carrying vessel shall be arranged by the Buyers or the Buyers
Shipping Agent China National Chartering Corporation. The Sellers shall bear all the charges and risks until the
goods are effectively loaded on board the carrying vessel.
b) 賣方必須在合同規定的交貨期限三十天前，將合同號碼、貨物名稱、數量、裝運口岸及預計貨物運達裝
運口岸日期，以電報通知買方以便買方安排艙位。并同時通知買方在裝港的船代理。倘在規定期內買方未
接到前述通知，即作為賣方同意在合同規定期內任何日期交貨，并由買方主動租訂艙位。
The Sellers shall advise the Buyers by cable, and simultaneously advise the Buyersshipping agent at the
loading port, 30 days before the contracted time of shipment, of the contract number, name of commodity, quantity,
loading port and expected date of arrival of the goods at the loading port, enabling the Buyers to arrange for
shipping space. Absence of such advice within the time specified above shall be considered as Sellersreadiness to
deliver the goods during the time of shipment contracted and the Buyers shall arrange for shipping space
accordingly.
c) 買方應在船只受載期12天前將船名、預計受載日期、裝載數量、合同號碼、船舶代理人，以電報通知
賣方。賣方應聯系船舶代理人配合船期備貨裝船。如買方因故需要變更船只或更改船期時，買方或船舶代
理人應及時通知賣方。
The Buyers shall advise the Sellers by cable, 12 days before the expected loading date, of the estimated laydays,
contract number, name of vessel, quantity, to be loaded and shipping agent. The Sellers shall then arrange with the
shipping agent for loading accordingly. In case of necessity for substitution of vessel or alteration of shipping
schedule, the Buyers or the shipping agent shall duly advise the Sellers to the same effect.
d) 買方所租船只按期到達裝運口岸后，如賣方不能按時備貨裝船，買方因而遭受的一切損失包括空艙費、
延期費及/或罰款等由賣方負擔。如船只不能于船舶代理人所確定的受載期內到達，在港口免費堆存期滿后
第16天起發生的倉庫租費，保險費由買方負擔，但賣方仍負有載貨船只到達裝運口岸后立即將貨物裝船之
義務并負擔費用及風險。前述各種損失均憑原始單據核實支付。
In the event of the Sellersfailure in effecting shipment upon arrival of the vessel at the loading port, all losses,
including dead freight, demurrage fines etc. thus incurred shall be for Sellersaccount. If the vessel fails to arrive
at the loading port within the laydays. previously declared by the shipping agent, the storage charges and insurance
premium from the 16th day after expiration of the free storage time at the port shall be borne by the Buyers.
However, the Sellers shall be still under the obligation to load the goods on board the carrying vessel immediately
after her arrival at the loading port, at their own expenses and risks. The expenses and losses mentioned above
shall be reimbursed against original receipts or invoices.
B． 成本加運費價條款 Terms of CFR Delivery：
賣方負責將本合同所列貨物由裝運口岸裝直達班輪到目的口岸，中途不得轉船。貨物不得用懸掛買方
不能接受的國家的旗幟的船只裝運。
The Sellers undertake to ship the contracted goods from the port of loading to the port of destination on
adirect liner, with no transhipment allowed. The contracte goods shall not be carried by a vessel flying the flag of
the countries which the Buyers can not accept.
（11）裝運通知：賣方在貨物裝船后，立即將合同號、品名、件數、毛重、凈重、發票金額、載貨船名及
裝船日期以電報通知買方。
Advice of Shipment：The Sellers shall upon competition of loading, advise immediately the Buyers by cable
of the contract number, name of commodity, number of packages, gross and net weights, invoice value, name of
vessel and loading date.
（12）保 險：自裝船起由買方自理，但賣方應按本合同第（11）條通知買方。如賣方未能按此辦理，買方因而遭受的一切損失全由賣方負擔。
Insurance：To be covered by the Buyers from shipment, for this purpose the Sellers shall advise the Buyers by cable of the particulars as called for in Clause(11) of this Contract, In the event of the Buyers being unable to arrange for insurance in consequence of the Sellersfailure to send the above advice, the Sellers shall be held responsible for all the losses thus sustained by the Buyers.
（13）檢驗和索賠：貨卸目的口岸，買方有權申請中華人民共和國國家質量監督檢驗檢疫總局進行檢驗。如發現貨物的'品質及/或數量/重量與合同或發票不符：除屬于保險公司及/或船公司的責任外，買方有權在貨卸目的口岸后90天內，根據中華人民共和國國家質量監督檢驗檢疫總局出具的證明書向賣方提出索賠，因索賠所發生的一切費用（包括檢驗費用）均有賣方負擔。FOB價格條件時，如重量短缺，買方有權同時索賠短重部分的運費。
Inspection and Claim：The Buyers shall have the right to apply to the General Administration of Quanlity Supervision, Inspection and Quarantine of the Peoples Republic of China (AQSIQ) for inspection after discharge of the goods at the port of destination. Should the quality and/or quantity/weight be found not in conformity with the contract or invoice the Buyers shall be entitled to lodge claims with the Sellers on the basis of AQSIQ s Survey Report, within 90 days after discharge of the goods at the port of destination , with the exception, however, of those claims for which the shipping company and/or the insurance company are to be held responsible. All expenses incurred on the claim including the inspection fee as per the AQSIQ inspection certificate are to be borne by the Sellers. In case of FOB terms, the buyers shall also be entitled to claim freight for short weight if any.
（14）不可抗力：由于人力不可抗拒事故，使賣方不能在合同規定期限內交貨或者不能交貨，賣方不負責任。但賣方必須立即通知買方，并以掛號函向買方提出有關政府機關或者商會所出具的證明，以證明事故的存在。由于人力不可抗拒事故致使交貨期限延期一個月以上時，買方有權撤銷合同。賣方不能取得出口許可證不得作為不可抗力。
Force Majeure：In case of Force Majeure the Sellers shall not held responsible for delay in delivery or non-delivery of the goods but shall notify immediately the Buyers and deliver to the Buyers by registered mail a certificate issued by government authorities or Chamber of Commerce as evidence thereof. If the shipment is delayed over one month as the consequence of the said Force Majeure, the Buyers shall have the right to cancel this Contract. Sellersinability in obtaining export licence shall not be considered as Force Majeure.
（15）延期交貨及罰款：除本合同第（14）條人力不可抗拒原因外，如賣方不能如期交貨，買方有權撤銷該部分的合同，或經買方同意在賣方繳納罰款的條件下延期交貨。買方可同意給予賣方15天優惠期。罰款率為每10天按貨款總額的1%。不足10天者按10計算。罰款自第16天起計算。最多不超過延期貨款總額的5%。
Delayed Delivery and Penalty：Should the Sellers fail to effect delivery on time as stipulated in this Contract owing to causes other than Force Majeure as provided for in Clause (14) of this Contract, the Buyers shall have the right to cancel the relative quantity of the contract, Or altenatively, the Sellers may, with the Buyersconsent, postpone delivery on payment of penalty to the Buyers. The Buyers may agree to grant the Sellers a grace period of 15 days. Penalty shall be calculated from the 16th day and shall not exceed 5% of the total value of the goods involved.
（16）仲裁：一切因執行本合同或與本合同有關的爭執，應由雙方通過友好方式協商解決。如經協商不能得到解決時，應提交北京中國國際貿易促進委員會對外經濟貿易仲裁委員會。按照中國國際貿易促進委員會對外經濟貿易仲裁委員會仲裁程序暫行規定進行仲裁。仲裁委員會的裁決為終局裁決，對雙方均有約束力。仲裁費用除非仲裁委員會另有決定外，由敗訴一方負擔。
Arbitration：All disputes in connection with this Contract or the execution thereof shall be friendly negotiation. If no settlement can be reached, the case in dispute shall then be submitted for arbitration to the Foreign Economic and Trade Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure of the Foreign Economic and Trade Arbitration Commission of the China Council for the Promotion of International Trade. The Award made by the Commission shall be accepted as final and binding upon both parties. The fees for arbitration shall be borne by the losing party unless otherwise awarded by the Commission.
（17）附加條款：以上任何條款如與以下附加條款有抵觸時，以以下附加條款為準。
Additional Clause ：If any of the above-mentioned Clauses is inconsistent with the following Additional Clause(s), the latter to be taken as authentic.
買 方 賣 方
The Buyers：The Sellers：
英文合同11
購 貨 合 同
PURCHASE CONTRACT
合同編號:
Contract No.:
簽訂日期:
Date：
簽訂地點:
Signed at:
買方：
The Buyers:
地址：
Address:
聯系人：
Contact:
電話(Tel):
傳真(Fax):
郵箱/E-mail：
賣方：
The Sellers:
地址：
Address:
聯系人：
Contact:
電話(Tel):
傳真(Fax):
郵箱/E-mail：
經買賣雙方確認根據下列條款訂立本合同：
The undersigned Sellers and Buyers have confirmed this contract in accordance with the terms and conditions stipulated below:
1. 商品名稱及規格
Name of Commodity & Specification
2. 數量
Quantity
3. 單價
Unit Price
4. 總金額
Amount
5. 包裝
Packing
6. 交貨時間
Delivery Time
7. 交貨地點
Delivery Place
8. 運輸方式
Means of Transport
9. 保險
Insurance
由_______方按發票金額的______%投保__________，加保______從______到______。
To be covered by for % of the invoice value covering additional from to
10. 付款條件
Terms of Payment
賣方收到50%定金后開始生產，發貨前買方付清余款。
After the receipt of 50% of the total value payment, the seller shall begin the production and the buyer pay the balance of the total value before delivery.
11. 裝運通知
Shipping Advice
一旦裝運完畢，賣方應立即電告買方合同號、品名、已裝載數量、發票總金額、毛重、運輸工具名稱及啟運日期等。
The sellers shall immediately, upon the completion of the loading of the goods advise the buyers of the Contract No. names of commodity, loaded quantity, invoice value, gross weight, names of vessel and shipment date by TLX/FAX.
12. 交貨原則
Delivery Policy
賣方在規定時間內所送貨物必須符合訂單要求，送錯或送少，應及時更換或補貨，否則，所帶來的損失由賣方全部承擔。
The sellers within the prescribed time delivery of goods must comply with the order request, sent to the wrong or the less, should be replaced or replenishment, otherwise, the losses borne entirely by the sellers.
13. 推遲交貨和罰款
Late Delivery and Penalty
如賣方沒有按照合同規定準時交貨，買方同意賣方付給罰款。加入賣方交貨期超過7天，買方有權取消合同。取消合同的情況，賣方仍不能延誤付給買方上述罰款。
Should the Sellers fail to make delivery on time as stipulated in the Contract, the Buyers shall agree to postpone the delivery on condition that the Sellers agree to pay a penalty. In case the Sellers fail to make delivery later than 7 days, the Buyers have the right to cancel the Contract and the Sellers, in spite of the cancellation, shall still pay the aforesaid penalty to the Buyers without delay.
14. 不可抗力
Force Majeure
如因人力不可抗拒的原因造成本合同全部或部分不能履約，賣方概不負責，但賣方應將上述發生的.情況及時通知買方。
The sellers shall not hold any responsibility for partial or total non-performance of this contract due to Force Majeure. But the sellers shall advise the buyers on time of such occurrence.
15. 爭議的處理
Disputes Settlement
所有與此合同有關的爭議應通過友好協商解決，如果協商不能解決，根據有關仲裁法則進行仲裁。仲裁應在深圳進行且其結果對雙方均有約束力，任何一方均不應向法院或其他政府部門申請以改變仲裁結果。仲裁費由負方負擔。
All disputes in connection with this Contract or the execution thereof shall be settled friendly through negotiations. In case no settlement can be reached, the case shall be submitted for arbitration ，in accordance with its Rules of Arbitration. The arbitration shall take place in Shenzhen and the decision of the Arbitration Committee shall be final and binding upon both parties; neither party shall seek recourse to a law court nor other authorities to appeal for revision of the decision. Arbitration fee shall be borne by the losing party. Or the Arbitration may be settled in the third country mutually agreed upon by both parties.
16.文字
Versions
本合同中、英文兩種文字具有同等法律效力，在文字解釋上，若有異議，以中文解釋為準。 This contract is made out in both Chinese and English of which version is equally effective. Conflicts between these two languages arising therefrom, if any, shall be subject to Chinese version.
17. 附加條款
Additional Clauses
本合同上述條款與本附加條款有抵觸時，以本附加條款為準
Conflicts between contract clause hereabove and this additional clause, if any, it is subject to this additional clause.
18. 本合同一式兩份，雙方各執一份，自雙方代表簽字/蓋章之日起生效。
This contract is made in copies, each party holds one, becomes effective since being signed/sealed by both parties.
買方（蓋章）：
The Buyer (seal):
代表（簽字）Representative (signature) ：
日期：
賣方（蓋章）：
The Seller (seal):
代表（簽字）Representative (signature) ：
日期：
英文合同12
Address:
Telephone：
Party B: Address:
Telephone：
According to the provisions of the contract law of the People's Republic of China and the relevant laws and regulations, Party B accepts the entrustment of the first party and entrustment with the two parties through consultation.
First, entrustment:
Two, the way of payment:
1, Party A shall pay 40% of the total cost of the contract, namely ____ yuan (RMB) to Party B, Party B received the money after the start of design.
2. Party B shall provide complete design draft. After confirmation by Party A, the total amount of the total cost shall be paid.
Three. Design time:
1, Party B shall provide complete design draft in __ working days.
2, Party B shall complete the design work of party a company commissioned in _____ years __ month __ day (delay time by party a reason, work time should be postponed).
Four. The responsibilities and obligations of the two parties:
1, Party B shall, according to the requirements of Party A to finish the related work on time.
2, Party A has the responsibility to fully cooperate with Party B to carry out the work stipulated in this contract and provide relevant information according to the needs of Party B. Party A is responsible for the consequences caused by Party A's delay in the required information.
3. Party A shall provide complete design information before the start of the design, due to Party A's provision of incomplete information and changes in content.
For structural changes, Party A shall pay the corresponding cost of design changes.
4. After Party B receives the complete design information of Party A, it is designed to facilitate the determination of the style of Party A, and Party B begins to design the first draft after the style is determined.
5, Party A has the right to put forward amendments to the works designed by Party B. The first draft Party A can make a structural modification. After the first draft is determined, the structural modifications should be made. Party A shall pay the corresponding cost separately.
6. The consequences of the delay due to the amendment of Party A shall be borne by Party A.
7, due to the loss caused by post production by Party A alone, the loss caused by problems in the design of the product is borne by Party B. The legal liability caused by copyright, for the economic disputes shall be borne by Party a..
8. During the course of the project, Party B is attached to the brand of Party A and shall not sign any form of cooperation agreement with the customer in the identity of Party B.
Five. The agreement on intellectual property rights:
1, Party B has the copyright of the works completed by the design. After the settlement of all the fees designed by Party A, Party B may transfer the copyright of the works to Party A.
2. Before Party A has not paid all the cost of the design, the copyright of the works designed by Party B shall be attributed to Party B, and Party A does not have any right to the work.
3. Party A shall have the right to investigate the legal liability of Party A if it uses or amends the works designed by Party B before the payment is not paid.
Six. Liability for breach of contract:
1, Party A terminates the contract before the completion of the first draft of the design work. The prepaid expenses have no right to request the return. If a party terminates the contract after the completion of the first draft of Party B's work, it shall pay the full design fee.
2. If Party B terminates the contract without proper reasons, the fees charged shall be returned to Party A.
Seven, if a party or a party has a dispute over the performance of this contract, it shall be settled amicable through negotiation. If either party fails to negotiate, any Party A and B can submit it to the Beijing Arbitration Commission for arbitration.
Eight, the contract is effective from the date of signature by Gai Zhang and both parties. The contract is two copies in one form. Each party has one contract signed by the other party (Gai Zhang), which has the same legal effect.
Nine. If there is no matter in this contract, the two parties shall jointly discuss and supplement the contract. The contents of the supplement and modification are equally valid to this contract.
Party A: Party B:
(signature seal) (signature seal)
Date: Date:
中文版
地址：
電話：
乙方：地址：
電話：
依據《中華人民共和國合同法》和有關法規的規定，乙方接受甲方的委托，就委托設計事項，雙方經協商一致，簽訂本合同，信守執行：
一、委托事項：
二、付款方式：
1、甲方需在合同簽訂之時支付總費用的40% ，即____元(人民幣)給乙方，乙方收到甲方的款項后開始設計。
2、乙方提供完整的設計稿，甲方確認后,應當即付清總費用的全部余款。
三、設計時間：
1、乙方需在__個工作日內提供比較完整的設計稿。
2、乙方需在_____年__月__日完成甲方公司委托的設計工作 (由甲方原因耽誤的時間，完稿時間應順延)。
四、雙方的責任與義務：
1、乙方應按甲方要求按質按量按時完成相關設計工作。
2、甲方有責任全力配合乙方開展本合同所規定的工作，并根據乙方需要提供相關資料。由于甲方提供所需資料延誤時間造成的后果，由甲方承擔。
3、甲方應在設計開始前提供完整的設計資料，由于甲方提供資料不完整、內容改動而造成的設
計結構改動，甲方須另行支付相應的設計改動費用。
4、乙方收到甲方的完整設計資料后進行部分小樣設計以方便甲方確定風格，風格確定后乙方開始進行初稿設計。
5、甲方有權對乙方所設計的.作品提出修改意見，初稿甲方可提出一次結構上的修改，初稿確定后的結構修改，甲方須另行支付相應費用。
6、因甲方修改，延誤時間造成的后果，由甲方承擔。
7、由于后期制作造成的損失由甲方獨自承擔，由于制作物設計出現問題造成的損失由乙方承擔。 因版權、文責所引發的法律責任，經濟糾紛由甲方承擔。
8、設計項目期間乙方掛靠于甲方品牌之中，不得以乙方身份單獨與客戶簽訂任何形式的合作協議。
五、知識產權約定：
1、乙方對設計完成的作品享有著作權。甲方將委托設計的所有費用結算完畢后，乙方可將作品著作權轉讓給甲方。
2、甲方在未付清所有委托設計費用之前，乙方設計的作品著作權歸乙方，甲方對該作品不享有任何權利。
3、甲方在余款未付清之前擅自使用或者修改使用乙方設計的作品而導致的侵權，乙方有權追究其法律責任。
六、違約責任：
1、甲方在設計作品初稿完成前終止合同，其預付的費用無權要求退回；甲方在乙方作品初稿完成后終止合同的，應當支付全額的設計費用。
2、乙方如無正當理由提前終止合同，所收取的費用應當全部退回給甲方。
七、甲乙雙方如因履行本合同發生糾紛，應當友好協商解決，協商不成的，甲乙雙方任何一方均可向北京仲裁委員會提請仲裁解決。
八、本合同自甲乙雙方簽字蓋章之日起生效，本合同一式兩份，雙方各持對方簽字（蓋章）合同一份，具有同等的法律效力。
九、本合同如有未盡事宜，由甲乙雙方共同討論補充或修改。補充和修改的內容與本合同具有同等效力。
甲方： 乙方：
（簽字蓋章） （簽字蓋章）
日期： 日期：
英文合同13
【】FUND L.P.
AND 【】INC.
SERIES A PREFERRED STOCK FINANCING
___ ___, 20__
This Term Sheet is not a legally binding agreement between the Investors and the Company, except the sections of “Confidentiality”, “Exclusivity” and “Administrative Fee”.
Notwithstanding anything to the contrary, any obligations of the Investors to complete or provide funding for any transaction, whether contemplated herein or otherwise, are subject to the receipt of internal approvals, completion of due diligence to the satisfaction of the Investors in their sole and absolute discretion, and the parties having negotiated, approved, executed and delivered the appropriate definitive agreements. Until execution and delivery of such definitive agreements, the Investors shall have the absolute right to terminate all negotiations for any reason without liability.
Exclusivity
The Company agrees that within forty five (45) days from the date of the signing of this Term Sheet, the Company and its shareholders, board members, employees and their respective relatives or affiliates shall not, directly or indirectly, take any action to solicit or support any inquiry, proposal or offer form, furnish any information to or participate in any negotiations or discussions with, any third party, or enter into any
agreement or arrangement, regarding any equity/debt funding or sale, without the prior written consent of the Investors.
This exclusivity is automatically extended to the period necessary for the Company to satisfy the closing conditions outlined in the Stock Purchase Agreement section of this Term Sheet. Notwithstanding the
foregoing, if neither the Company nor the Investors give written notice of its wish to terminate this Term Sheet at least five days prior to the end of the exclusivity period, the Term Sheet shall remain in full force and effect, and the Company shall continue to negotiate exclusively with the Investors until the Company or the Investors give written notice of termination.
In this Term Sheet,
"$" or "dollar" means United States dollars;
"Ordinary Share Holders" mean the holders of Ordinary Shares;
"Preferred Shares" mean shares of the Series A Preferred Stock; and
"Shareholders" mean holders of Ordinary Shares and Preferred Shares.
英文合同14
Individual Mortgage Loan Contract for Purchasing
Commercial Housing
Agricultural Bank of China
GF Zi No.12105200500001133
Guarantor: HUANG Wenya (sealed)
In accordance with relevant state laws and rules, the contract is made after negotiations between the both parties.
Loan items
Article 1. Loan money:
The debitor provides loan to the creditor to purchase the residential house. The contracted loaning amount: Article 2. Loan purpose:
To purchase the housing locate The contract number of the debtor: Article 3. Loan period
Article 4. Loan interests
1. by the Bank of China. In the event that the Bank of China adjusts the interest rate of the loan, from Jan.1 the next year, the debtor performs the interest payment according to the new loans confirmed by the floating scope between the adjusted standard interest and the lending rate agreed in the contract. It will not notify the debtor, the guarantor and the mortgager again.
2. If the borrower doesn’t refund the loan in accordance with the contract, from the overdue time, the lender has the right to call for additional money as penalty until the corpus and interests are paid off. Following the measure will be complied with. day
3. The creditor has the right to call for percent raising money as penalty at the basis of the annual interest rate stipulated in the contract. In the event that the Bank of China adjusts the interest rate of the loan, the loan rate under the contract shall comply with the relevant regulation from the day of adjusting rate.
4. If the borrower does not use the money according to the purpose stipulated in the contract, the lender has the right to call for percent raising money as penalty at the basis of the annual interest rate stipulated in the contract. In the event that the Bank of China adjusts the interest rate of the loan, the loan rate under the contract shall comply with the relevant regulation from the day of adjusting rate.
Article 5.
Under the circumstances that the following conditions are not achieved, the lender has the right not to provide the loan stipulated in the contract.
1. The borrower shall offer relevant documents, materials and credence in accordance with the requirements of the lender. And the borrower shall
handle the relevant procedures.
2. The purchasing money of the first period and the money related to the contract have been paid off.
3. If the contract has a guarantor and the procedures of relevant registration and/or insurance have been settled in accordance with the requirements of the borrower, this guarantee keeps effective.
4. The borrower, the guarantor and the mortgager don't make any disadvantageous matters which will affect the safety of loan.
Article 6. Transferring methods:
The borrower opens an account in the lender’s bank. The account name is The opening bank iscard number is measure.
1. The debtor irrevocably accredits the lender to transfer the money to the above settle account, then transfer to the house seller ), to pay the money agreed in the contract of purchasing house.
2. The borrower irrevocably accredits the lender to transfer the money to ) (Account number),
Article 7 Loan payment
1. The borrower pays the principal and interest of the load under this of If there is not the day of borrowing, the payment day is the last day of every month. The borrower
(1) Equal capital and interest payment.
(2) Equal capital descending payment.
(3)Other methods of payments
2. If picking up the equal capital and interest payment, the borrower shall pay Article 8 Prepayment
1. If Borrower needs to refund in advance, it shall note Lender one month before refund day and the notice is irrevocable upon delivery. On the precondition that the borrower promises to refund the money agreed in following item 2 due to breach of contract and the premises that the borrower abides by the prescription of prepayment, the lender may agree prepayment.
2. If the borrower has prepayment days after the real day of loan lender in advance.
Article 9 Change of payment time
If the borrower wants to change the payment time, he shall submit a written application to the lender 30days in advance. After the approval of the guarantor and the mortgager, the borrower can sign the agreement of the changing of the limit time and handle relevant insurances and guarantee procedures.
Article 10 Transfer of creditor's rights and debt
The borrower can transfer the rights and interests to the third party without the permission of the lender, guarantor and the mortgager.
Article 11 Borrower’s declaration and guarantee
Article 12
Between the time of signing and the time of distributing money, if the borrower and the house seller have disputes about the rights and quality of the house, or it occurs some matters that may cause the borrower incapable of paying money, the lender has the right to terminate the contract.
Guaranty of the Loan
Article 13 Premises Guarantee
The scope of mortgage is principal and interest of loan punished interest and the cost of real claims.
Article 14 Mortgage Guarantee
1. The mortgager voluntarily mortgager the following belongings The above guaranty is an integral part of the contract. moment.
3. The scope of mortgage include the capital, the interest, the fine, compound interest, the money of breach of the contract, the compensation for damage of loan and all the fees that realize the creditor’s rights.
4. The declaration and guarantee of the mortgager
5. The efficacy of mortgage rights
6. The control and management of the guaranty
7. The insurance of the mortgage
8. The registration of the mortgage
9. The realization of the mortgage rights
The duties of breach of the contract
Article 15 Duties of the debtor
When the Mortgager fails to pay the principal, interest and relevant expenses in full amount on time or fails to wholly perform its states or warranties under the contract, it will constitute a breach of contract. The mortgager shall pay the money of breach of the contract according to the quantity and the delaying days.
英文合同15
The buyer: the seller: ____________ ____________
Address: Address: ____________ ____________
Tel: ____________ Tel: ____________
Fax: Fax: ____________ ____________
Contact: Contact: ____________ ____________
The sale of the friendly negotiation of both parties, the buyer seller commissioned processing production ________ mould Co ______ set. The two sides reached the following processing agreement
Basic mould of die:
Product name serial number part name point number (mold type) mold single price (RMB yuan) delivery condition
Total price: (including 17% VAT)
The above set of mould material: _____________________
(the above mold materials are provided by the seller).
I. The rights and responsibilities of the two parties:
Buyer's responsibility and rights are as follows:
1. the buyer is responsible for the delivery of the R & D requirements and plans of the seller's project, and provides the sales forecast as far as possible.
2. the buyer is responsible for the delivery of the product design drawings and other related technical information required by the seller to the seller and the technical support.
3., the buyer has the sole right to interpret the product design drawings and related technical data delivered to the seller. When there is ambiguity, the Seller shall consult the buyer's opinion and confirm it by the buyer.
4. after the seller completes the design and manufacture of the mould, the buyer will go to the seller's site to verify the mold, or to provide the product sample to the buyer for confirmation and confirmation by the seller. The moulds referred to in this contract include the mould of the product itself and the fixture and mould needed for the subsequent production.
The rights and responsibilities of the seller are as follows:
1. the seller is responsible for the design and manufacture of the moulds according to the product design drawings and other related technical information provided by the buyer.
Be responsible for completing the mold according to the buyer's design requirements in accordance with the stipulations of the contract.
2. the Seller shall be responsible for providing timely certification and sample test, trial production of desired products. At the same time the seller must provide the details of the related products.
The detailed test report is for the buyer's confirmation. In case of repair / modification, the test report is also attached at the same time.
The buyer does not bear any responsibility.
1.5 the Seller shall give the buyer the corresponding compensation in the form of the buyer's approval as the seller causes the buyer to spend the labor and cost outside the normal technical support as a result of the seller's cause.
2. the progress of the model:
2.1 the seller after the receipt of the buyer after the confirmation of product drawing, which began to enter the mold design and production stage, open cycle for ________ days
2.2 due to buyer's cause the delay of mold making progress is not calculated.
2.3 if the seller's mold making process and other mistakes lead to the failure of the mold to be accepted and the buyer is in urgent need of production.
At the same time, the production should be arranged with the existing mold, and the die should be reopened according to the requirements of the drawings and samples.
3. mode of payment:
Party B agrees that Party A will pay the payment as follows.
3.1 separate settlement: Monthly knot, 60 days after the opening of the ticket, open 17% VAT invoices.
3.1.1 of the total amount of the contract manufacturing batch mould (including VAT) for RMB _________ yuan (RMB ________ yuan), the buyer to pay the total amount of _____% mold, mold ___% residual cost allocation in the first 50K products, if the number of orders less than 50K, the buyer shall supply the seller after the unamortized tooling cost.
3.1.2 from the two sides after the signing of the contract, the seller to provide value-added tax invoices (mold total ____%), the buyer within twenty working days of payment.
4. product order: only after the quality acceptance of the product sample is qualified and the buyer's written confirmation, the seller may accept the order of the third party authorized by the buyer or the buyer. The order contract signed by third parties authorized by the buyer with the buyer's seller is subject to this contract.
Four, product quality assurance
After the seller has completed the mold, the Seller agrees to guarantee the quality of the product in accordance with the buyer's quality standard (the first confirmation report).
The buyer reserves the right to modify the content of the quality standard in accordance with the actual needs.
Five. The ownership of the mold
1. the ownership of all moulds and clamping fixtures and their assembly drawings and parts drawings (including 2D and 3D) involved in the contract shall be owned by the buyer, and the Seller shall not interfere with the buyer's disposition of the molds. If the seller is responsible for the custody of the seller, the Seller shall not supply the mould to the third party without the buyer's consent, otherwise the buyer shall have the right to ask the seller to return the mold fee and compensate for the loss.
2. when the buyer pays the mold cost, the seller must cooperate with the buyer or the third party designated by the buyer to transfer the inspection and accept the replacement of the die from the seller's place, and will replace the worn parts at the expense of itself, so as to ensure the restart of production. The seller is obliged to assemble, rust and pack the moulds and send it to the place designated by the buyer. All mold assembly drawings and part drawings (including 2D and 3D) and all clamping devices must be transferred to the buyer at the same time.
3., during the process of mold transfer, such as the improper assembly, rust prevention or packaging of the seller, it will cause damage to the mold, and all direct and indirect losses arising therefrom shall be borne by the seller.
Six, mold maintenance
1., the Seller guarantees the service life of the mould 500 thousand times, and the seller is responsible for free maintenance during this period. If the mold is not used during the service life, the Seller shall be responsible for changing or re opening the mold and taking the corresponding cost.
2. the seller should die changes, maintenance and repairs in a timely manner and register, whether such a modification, maintenance and repair are
The buyer made it. If the buyer is to ask the relevant technical details or evidence, the buyer may register with the time without notice. The Seller shall give the buyer a copy of the record once every three months. The seller should take the initiative to complete this task on a regular basis without the buyer's request.
Six. Intellectual property rights
The product and the buyer 1. involved in this contract to provide design drawings and other information in the intellectual property is owned by the buyer, the buyer without permission, the Seller shall not disclose to any company or individual, otherwise all the losses resulting from the seller; the buyer only agreed to all data and information provided by the seller by the buyer the purpose of this contract based on the,
2. the Seller agrees to the design drawings will not be provided by the buyer and other data or information for the purpose of non contract other than the seller or the buyer has the right to pursue responsibility; without written permission from the buyer, the Seller shall not in publications, advertising or other written and oral form to the seller to provide or have provided any data and information.
3., without the buyer's license, it is strictly prohibited for the seller to use this mould to supply other customers other than the buyer or the buyer's designated customer, otherwise all direct and indirect losses arising from it shall be the seller's responsibility.
4. other undisclosed matters of confidentiality are carried out in accordance with the "confidentiality agreement" signed by the buyer and the seller.
Seven. Liability for breach of contract
1. the Seller shall be liable for breach of contract if the seller fails to complete the mold making and sample delivery according to the progress of each stage specified in the 2.1. The Seller shall pay the buyer a fine of 2% of the total amount of this contract at a time of one day of delay. The amount of the penalty is not more than the total amount of the contract.
2., if the seller's cause causes the seller's quality to be supplied to the buyer can't meet the buyer's requirements, and the other materials will be lost and scrapped during the assembly process, the seller will fully compensate for the loss and scrap materials and the resulting artificial / stop line costs. The two parties may sign separately the raw material for production.
3. the quality and progress of the product provided to the buyer by the seller for the seller's cause can not reach the buyer.
Place)
3. when the mold is certified by the buyer, the seller is responsible for the seal of the mold. If the buyer agrees that the seller is responsible for the subsequent processing and production of the products, the Seller shall be responsible for the repair and maintenance of the moulds, and the Seller shall make the batch production according to the order of the third party authorized by the buyer or the buyer.
4. for all the molds produced by the buyer, the Seller shall provide the buyer with detailed design drawings. All drawings must be made in AutoCAD or pro-eng (pro-el2) and must be transmitted to the buyer in electronic form before the mold opening for approval.
Two. Technical terms:
1. repair and maintenance of the mold: the seller is responsible for the repair and maintenance of the mold during the production process.
2., after no dispute between the two sides, the buyer will provide the product design drawings and related technical information to the seller, and send the engineer to the seller's technical exchange or the seller send the engineer to the buyer for technical communication. The product drawings and technical requirements list is attached to Annex 1.
3. the seller promised to use the quality requirements of the mold for the system to produce products to the buyer
4. the seller promised to use the mold for the system to produce the product can reach the seller's delivery capacity:
Nissan energy: _______k, monthly capacity: ______k
5. the seller promises that all the moulds involved in this contract can be reached to 400 thousand times.
6., without the buyer's permission, it is strictly prohibited for the seller to contract the whole part of the contract involved in the contract to other companies for processing. Otherwise, the Seller shall be liable for breach of contract in accordance with the breach clause of the contract as a breach of contract.
Three. The terms of business:
1. mold price:
1.1 after negotiation between the two parties, the seller will provide the final offer of the mould approved by the buyer and sign the price confirmation as an indispensable part of the contract.
The total amount of 1.2 contract (including VAT mold ____%) rmb_______.
1.3 the total cost of the price of the mold contains the following expenses, and the Seller shall not ask the buyer for the following reasons:
1.3.1 the cost of all the fixtures and tools required by the seller for the molding / two processing / assembly of the product;
1.3.2 the seller, according to the contract, carries out the cost of material, equipment and manpower for mould design, test mould.
1.3.3 the cost of the sample (800 sets) provided by the seller to the buyer for the certification of the mold and product;
1.3.4 the seller is the cost of the die vulnerable spare parts to ensure the normal production of the mold;
1.3.5 the cost of the related tools and tools for other processes that are prepared for the normal production of the product.
1.4 when the written request of the buyer the seller according to the change of the product design for the mould modification, if the mould modification is relatively simple, including less mold material changes and other simple changes from the mold, the seller to the buyer without charges; if the modification is complex, great influence on the whole structure of the mold, then the seller according to the modified working hours for mold to the buyer by the buyer offer, the corresponding mold modification cost. The buyer shall not bear any responsibility for the repair or modification of the mold due to the seller's reason, due to the failure of the mold to meet the buyer's requirements.
1.5 by the seller to the buyer's manual and cost technical support from the normal cost, the Seller shall give the buyer recognized the way the corresponding compensation.
2. the progress of the model:
2.1 after the seller has received the product drawing file after the buyer's confirmation, that is,
The cost of artificial / stop line formation. The two parties may sign separately the raw material for production.
3. if the seller has caused the seller to the buyer of the product quality and schedule is not up to the requirements of the buyer, the buyer and customer missed the best time to market, or the buyer was forced to cancel the project, so that the buyer and its customers suffer serious losses and loss of material research, in addition to the seller to refund all previous the buyer to pay the purchase price, depending on the actual situation of the seller also bear the buyer direct and indirect economic losses.
4., if the seller is unable to resist force, including the war, fire, strike, and other force majeure caused by Chinese law, the buyer will allow the buyer to dismiss it. The Seller shall notify the buyer in written form within 24 hours after the occurrence of the force majeure, and the seller is obliged to take all necessary measures to deliver the goods as soon as possible. If the force majeure continues for more than 2 weeks, the buyer has the right to cancel this contract.
5. other unfinished matters: implemented in accordance with the economic contract law.
Eight. Dispute settlement
Any dispute arising from the execution of this contract shall be settled through friendly negotiation first. If no negotiation can be reached within 30 days, either party can submit the dispute to the municipal court.
The parties to this contract shall be strictly enforced. If one party fails to perform the contract in the cause of the contract, the party must ask for the consent of the other party two weeks in advance, and the contract shall be terminated.
The buyer: the seller: ____________ ____________
Representative: Representative: ___________ ____________
【英文合同】相關文章：
英文合同05-16
【精選】英文合同四篇04-27
【精選】英文合同三篇04-28
英文合同（精品11篇）05-16
英文合同集錦5篇05-10
英文合同匯總9篇05-03
【實用】英文合同3篇04-27
【精華】英文合同3篇04-27
【熱門】英文合同四篇04-27
【實用】英文合同三篇04-27